Fabric Balls

These luminous fabric-covered ornaments are made without sewing a stitch, so they are the perfect project for kids old enough to work with pins. We covered the balls with satin, taffeta, and velvet and finished them with metallic-silver ribbons and twine.


What You'll Need


  • Fabric balls template
  • 2- and 3-inch Styrofoam balls
  • Fabric
  • Ribbons, rickrack, and/or cord
  • Straight pins and pearl-head pins
  • Pearl beads, tassel balls and tassels
  • Craft glue
  • Sewing shears (for cutting fabric) and embroidery scissors (for cutting trimmings)


  1. Using our template as a guide, cut out six sections of fabric for each ball on the fabric's bias (diagonal to the grain).

  2. ft_ornament23_xl

    Place a fabric section on the ball, stretching it pole to pole, and secure it with one pin at each pole.[See image 2 above.] Place the second section directly opposite the first, and pin it at each pole. Sections should meet or slightly overlap at poles. Pin remaining four fabric sections so that the ball is completely covered. Trim any excess fabric trim with embroidery scissors.

  3. ft_ornament24_xl

    With ribbon on its spool, pin ribbon's end at top pole, wind it around ball to cover seams, and pin it again at top pole; cut loose end. [See image 3 above.] Repeat two more times, covering remaining seams. If ends of trimmings fray, apply a dab of craft glue. You can use the same wrapping method to add strips of silver twine to the ball, one centered on each section.

  4. ft_ornament25_xl

    To finish the top, stack a pearl or bead on a pearl-head pin, then add a loop for hanging. Cut silver twine to desired length, dab glue on ends, and run pin through both ends of twine. Dip tip of pin in craft glue, and insert in ball; let dry before hanging. To finish bottom, add beads, pearls, or a tasseled ball to a pearl-head pin. You can embellish the sides by attaching beads and sequins with more pearl-head pins.

Related Articles