This charming baby quilt is an easy-to-make gift, and great for new moms.

Updated September 20, 2018
Read step by step instructions after the video.

Resources
Martha used "Entertaining Elephants" fabric by Alexander Henry Fabrics, available from Purl Soho; Quilter's Dream Select cotton batting; and a Pfaff Quilt Expression Sewing Machine.

Advertisement

What you need

Materials
Advertisement

How to do it

Part 1

Step 1

Cut a square from the decorative fabric, a little bigger than you intend for the finished quilt. We used the measurement of the width of the fabric and made a 44-by-44-inch square.

Advertisement
Step 2

Place the square of fabric (the "quilt top") on top of a layer of quilt batting. Place fabric and batting on top of a piece of woven flannel. Make sure batting and flannel are a few inches bigger than decorative fabric.

Step 3

Use safety pins to "baste" the quilt (hold layers in place temporarily). You can also baste the quilt by sewing long loose running stitches through the layers, spaced several inches apart.

Advertisement
Step 4

Lay a piece of masking tape diagonally (corner to corner) across the top of the quilt. Line up the tape with the edge of the sewing machine presser foot, and use the tape as a guide to stitch across the quilt. We used stitch No. 52 on the Pfaff, which looks like a hand-quilted stitch.Tip: To keep stitching secure, start sewing just off the top fabric (in the batting), and end just off the top fabric on the other end.

Advertisement
Step 5

Remove masking tape, line it up against line just stitched, and stitch another line in the same way; repeat, moving from the center out to the corners.

Step 6

When the quilt is completely machine-quilted, trim off extra batting and flannel around edges of top fabric, and trim the quilt to size, if necessary.

Advertisement
Step 7

Cut 3 and 3/4-inch strips of solid fabric for the binding, and sew together end-to-end to make one long strip that is at least 5 yards long. Press the strip in half lengthwise.

Advertisement
Step 8

Pin raw edges of strip to raw edges of quilt, all the way around on the back of the quilt (flannel side). Sew the binding to edge of quilt with a 1/2-inch seam allowance, mitering the corners.

Step 9

Flip the binding over the raw edge of the quilt, and sew the folded edge to the front of the quilt with a decorative stitch. We used stitch No. 55 on the Pfaff, which is a faux blanket stitch.

Comments

How difficult was this project?
Be the first to comment!

Project Toolbar

Font Size