DIY Projects & Crafts Modern Birdhouse Invite feathered friends to your yard with this little handmade home. The triangular A-frame shape is easily crafted with lightweight wood and assembly only requires a few basic tools. By Martha Stewart Editors Martha Stewart Editors Facebook Instagram Twitter Website An article attributed to "Martha Stewart Editors" indicates when several writers and editors have contributed to an article over the years. These collaborations allow us to provide you with the most accurate, up-to-date, and comprehensive information available.The Martha Stewart team aims to teach and inspire readers daily with tested-until-perfected recipes, creative DIY projects, and elevated home and entertaining ideas. They are experts in their fields who research, create, and test the best ways to help readers design the life they want. The joy is in the doing. Editorial Guidelines Updated on May 14, 2020 Share Tweet Pin Email Placed next to a bird feeder, this simple birdhouse becomes an oasis for your feathered friends that they'll never want to leave. The triangular A-frame shape is easy to make with lightweight wood veneer sheets, and assembly only requires a few basic tools. This project comes from our contributor Anusha Rajeswaran. What You'll Need Materials Birch wood, two pieces: 5 1/2 by 6 inches, three pieces: 3 by 6 inches Balsa wood, 4 by 12 inches Wooden dowel, 3/8 by 6 inches All-purpose craft knife ($8.49, michaels.com) Ruler Pencil Super glue Cutting mat ($22.99, michaels.com) Handheld drill and 3/8-inch drill bit ($99, homedepot.com) Cotton rope Fine-grit sandpaper (optional) Instructions Cut a rectangular piece of birch wood that measures 5 1/2 by 6 inches. With a pencil, mark the middle point of the rectangle and draw two lines down from the top middle point to the bottom corners to create a triangular shape. Lightly drag your craft knife along the traced lines using the ruler as a guide. Continue gently scoring the wood several times until it cuts through completely. Repeat to create an identical back piece. In the center of the front piece, mark and cut a 1-inch square for the birdhouse entrance hole. Cut three pieces of wood for the sides and bottom, each measuring 3 by 6 inches. With the handheld drill and 3/8-inch drill bit, drill a hole in the front and back pieces for the dowel. Then, drill a hole in the top two side pieces where you will insert rope for hanging. With super glue, carefully secure all of the pieces together except for the back piece; set aside to dry. To create roof shingles, use balsa wood. Cut 1/2-inch vertical lines on a long piece of wood. Then, flip it horizontally and cut 1-inch pieces. (In total, we used about 100 shingles to cover the sides.) Starting with the bottom row, glue the roof shingles on the side pieces ensuring that you leave the drilled hole uncovered. Once dry, trim the shingles hanging off the side edges with the craft knife. Insert the rope through the two side holes and knot on the inside. Finish by gluing the back piece onto the birdhouse. If desired, use the fine grit sandpaper to smooth down rough spots like the drilled holes.