Celebrating Flag Day: Flag Plaque How-To
Martha Stewart Living, June 2004
- Sandwiching the plaque between shims to protect it, clamp it to the edge of a table. Use a fabric measuring tape and a pencil to make marks every 3 inches along the top half of the outer edge.
- Wrap a piece of masking tape around the drill bit inch from its end. At each pencil mark, drill a hole into the edge of the plaque, stopping when the tape meets the plaque.
- Sand, prime, and paint the plaque; let it dry. Mount the house numbers on the plaque using screws. Hang it, and then slip the flags into the holes.
- 9 1/2-by-12 1/2-inch oval unfinished wood plaque wood shims
- 2 clamps fabric measuring tape pencil masking tape drill with-inch bit
- 220-grit sandpaper
- 1 quart exterior primer
- 1 quart exterior paint
- 4-inch metal house numbers with mounting screws five 4-by-6-inch flags with -inch dowels, each 10 inches long
© 2014 Martha Stewart Living Omnimedia. All rights reserved.