Martha Stewart Living, May 2009
Apply a base coat. Using a 9-inch paint roller with a 1/4-inch nap, paint the surface in desired color using latex paint. Let dry thoroughly
Mix 1 part latex paint (pearl finish or satin finish) with 1 part latex or acrylic glazing liquid and 2 parts water. (If using oil paint, mix 1 part oil paint with 1 part oil glazing liquid and 1 part mineral spirits.)
Proceed with any of the patterns, applying the tinted glaze over the dried base coat. Tip: Smooth irregularities as you work (they can catch the glaze and obscure its effect).
Mark several 9-inch-wide sections on dried base coat using a pencil and a level.
Cut several 1/4-inch-wide teeth into a rubber potters rib, using a utility knife.
Apply a thin coat of tinted glaze to the dried base coat using a 9-inch paint roller with a 1/4-inch nap. Working in sections, drag the teeth of the potters rib through the glaze vertically. Let dry completely.
Apply a second coat of tinted glaze. Drag the comb through glaze horizontally. Tip: Use a small (1/4-inch-wide) artists brush to touch up lines that are not well defined.
Base Coat: Martha Stewart Colors MS109 Yellow Narcissus
Glaze Tint: Martha Stewart Colors MS106 Rain Slicker
9-inch paint roller with a 1/4-inch nap
Small artists' brush
The trick to re-creating this gingham pattern is to pull a potter's rib (into which teeth have been cut) through yellow glazes, first vertically and then horizontally. Working in small, squared-off sections makes it easier to cover an expansive surface, such as a wall.
Note: The size of the gingham checks depends on the width of the teeth that are cut into a potter's rib.
Other Colors to Try 1. Base Coat: Benjamin Moore 199 Barley Glaze Tints: Martha Stewart Colors MS106 Rain Slicker (vertical lines) and MS244 Cardamom (horizontal lines)
2. Base Coat: Benjamin Moore 750 Seabrook Glaze Tint: Benjamin Moore 648 Kokopelli Teal