Chain Wallet How-To
Start with a 3 1/2-by-10 1/2-inch sheet of craft foam.

1. Lay an 11-inch piece of striped grosgrain ribbon lengthwise down the center, and tape in place using low tack tape; fold the extra 1/2 inch over on one end, and tape. (Don't secure with pins -- they leave marks.) Decrease the tension on your sewing machine, and stitch the ribbon along both edges. Remove tape.

2. Turn over, ribbon side down, and fold up the bottom third with the unfinished edge. Stitch both sides closed to make a pocket.

3. Apply Velcro strips to the outside bottom of the pocket and inside the top flap. Use a grommet tool to install a grommet in the flap. Attach a long ball-chain key ring.