Use hardware cloth (a type of metal mesh) to make an enclosure for the two-foot peacock. The flat-bottomed version can stand on a table or the floor. The other is meant to be hung.

Tools and Materials

• 1/2-inch grid hardware cloth, 4-by-10-foot roll by Redi-Roll; hardwarestore.com
• Straightedge
• Permanent-ink marker
• Wire cutters, 7 inches; 2fiskars.com
• 24-gauge wire
• Pliers
• Branch
• Faux peacock, closed-tail-feather peacock, 24 inches; hankenimports.com
• Faux peacock, open-tail-feather peacock, 60 inches; hankenimports.com
• S hook
• Chain

Peacock Walk with Black-and-White Backdrop How-To

1. Place hardware cloth horizontally on a workbench or picnic table (it could scratch the work surface.) Using straightedge and marker, mark outlines as indicated on the illustration for the hanging cage.

2. Repeat using the illustration for the standing cage.

3. Cut along those lines (indicated in green in the illustrations in step 1 and step 2) with wire cutters.

4. Shape the cage: With piece on the workbench or picnic table, align a fold line (indicated in blue in the illustrations) with the edge of the table. Press on it, and crease. Repeat with other fold lines.

5. Close the open side of the cage by using the pliers to loop wire prongs through a mesh square on the opposite side, and bend the wire closed.

6. Close the bottom of the cage by folding in the flaps (four pointed ones for the hanging cage or the single square one for the standing cage); loop the wire prongs, and use wire to secure as necessary. Cut branch to fit snugly in cage. Position in cage, wiring it in place if necessary, and wire peacock to branch. Close top of the cage with wire.

7. For the hanging cage, loop S hook through the top of the cage; hang it from the ceiling with the chain.