Close

Project

Decorative Tray

A standard baker's tray becomes a vibrant decorative piece with this easy how-to.

Decorative Tray

Source: The Martha Stewart Show, December 2010

Introduction

The tray is featured in decorating editor Rebecca Robertson's Eclectic Modern Room.

materials

  • 1 yard decorative fabric

  • Aluminum rimmed baking sheet

  • Spray adhesive

  • Scissors

  • Fabric glue

  • Synthetic felt

  • 1/4-inch-thick acrylic sheet cut to fit inside of tray, with corners rounded

steps

  1. Cut fabric large enough to cover the front and wrap around the back of the baking tray. Cover the front of the tray with spray adhesive.

  2. Place fabric on tray so pattern is aligned, leaving enough room to wrap fabric around all sides to the back. Smooth fabric onto tray, pressing out any bubbles.

  3. Pull any extra material into corner and push around the edge. Turn tray over. Cover the back of the tray with spray adhesive.

  4. Press the fabric over two edges of the tray first, then fold in on each remaining side, as if wrapping a gift. Trim any excess fabric with scissors. Use fabric glue to secure, if needed.

  5. Cut a piece of felt to fit the back of the tray and conceal fabric edges. Smooth felt on the back the tray.

  6. Place acrylic sheet in center of tray.

Reviews

Be the first to comment!