Source: Martha Stewart Kids, Volume 5 2002

Introduction

This little office-on-the-go starts with a store-bought wooden artist's supply box outfitted with a slightly larger board for a desktop and painted white. Small and light enough for kids to carry, it can be taken on vacation or toted outdoors on a warm afternoon.

materials

  • 1/4-inch-thick stiff fiberboard or plywood

  • Art box

  • Sanding paper

  • Wood glue

  • 1/4- or 3/8-inch screws

  • Lattice strip

  • Clamp

  • Primer

  • Paint

  • Mini storage containers

  • Adhesive-backed Velcro disks

steps

  1. Cut a piece of 1/4-inch-thick stiff fiberboard or plywood to be 4 inches wider and 2 inches deeper than a store-bought art box. Sand edges.

  2. Use wood glue to attach the board to the top of the box; position so top lies flush against the back of the box. Reinforce with four 1/4- or 3/8-inch screws (below), attached from the inside of the box lid at each corner (above; screws should be short so their tips do not damage the desk surface).

  3. Cut a 1/2-inch-wide lattice strip as long as the desktop's width, and glue it to the top of the overhanging edge; clamp until dry.

  4. Prime and paint the desk, inside and out. Arrange plastic, semi-transparent storage containers along the inside edges of the box as desired, leaving plenty of room for papers and notebooks.

  5. Apply adhesive-backed Velcro disks (available at art-supply and sewing stores) to the underside of the containers and the inside of the desk, positioning carefully so there is enough room for lids to open.

Reviews

Be the first to comment!