No Thanks
Keep In Touch With

Sign up and we'll send inspiration straight to you.

Martha Stewart takes your privacy seriously. To learn more, please read our Privacy Policy.


Nursery Lamp

Add a bit of charm to any nursery with this lovely bunny lamp.




Resources: Square wooden lamp base is available from Drill, drill bit, and jigsaw are from A pom-pom maker may be purchased from All other supplies are available at home-improvement and crafts stores.


  • Bunny template
  • 3M Spray Mount Artist's Adhesive
  • 1/2-inch MDF or plywood
  • Jigsaw
  • Sandpaper
  • Ruler
  • Pencil
  • Painter's tape
  • Drill with 3/16-inch bit
  • 3/16-inch dowel
  • Lamp base, lightbulb, and shade
  • Paint in chosen colors for bunny and lamp base
  • Paintbrush
  • Ribbon for wrapping lamp pipe
  • Double-sided tape
  • Pom-pom for tail
  • Shell button for eye
  • Ribbon for bow
  • Wood glue


  1. Step 1

    Enlarge and print template on regular paper. Use temporary spray adhesive to hold template in place on a piece of 1/2-inch MDF or plywood. Cut out the bunny shape with a jigsaw, following the outline. Sand and buff rough edges with sandpaper.

  2. Step 2

    Measure and mark 1 1/4 inches in from each side on the bottom edge of the bunny's larger "foot."

  3. Step 3

    Measure 1/4 inch up from the tip of a 3/16-inch drill bit and mark with a piece of painter's tape. Drill on marks you have created on the bottom edge until you reach the tape, to make 1/4-inch-deep holes.

  4. Step 4

    Cut two pieces from a 3/16-inch dowel that are 1/2 inch in length, and insert into the holes you have drilled.

  5. Step 5

    Position and center the bunny on the lamp base, close to the pipe, and mark the positioning of the dowels. Drill 1/4-inch-deep holes into the marks on the lamp base as you did on the bunny.

  6. Step 6

    Paint the lamp base and bunny in desired colors.

  7. Step 7

    Wrap the lamp pipe with ribbon, adhering each end with double-sided tape.

  8. Step 8

    Embellish the bunny with a pom-pom tail, a shell button eye, and ribbon bow around neck. Apply some wood glue on the pegs in the bottom edge of the bunny and insert into holes on lamp base.

  9. Step 9

    Add lightbulb and shade.

The Martha Stewart Show, March 2009



Reviews (2)

  • froglady2000 4 Aug, 2009

    Love this but need a jungle animal template.

  • JMarsden 15 May, 2009

    This is one of the cutest things I've seen. My aunt is expecting a granddaughter, so she will be looking for ideas for the nursery.