'Tis the season for sharing, and what better way to spread holiday cheer than by giving a handmade gift to those you care about? These felt punched stockings are a simple and thoughtful gift and a great way to let St. Nicholas know that you've hung your stockings by the chimney with care.
Tools and Materials
Stocking Template
Boot Template
Stripes Template
Alphabet Template
Snowflakes Template
Red and white felt
Disappearing fabric pen
Scissors
Pins
Screw punch
Needle and tread
Red Front of Stocking How-To
1. Download and print out each template: Stocking Template, Boot Template, Stripes Template, Alphabet Template, Snowflakes Template. Enlarge stocking template 250 percent and print.
2. Place template for front of stocking on red felt.
3. Trace around template with disappearing fabric pen and cut.
4. Cut out dot shapes and letters from template.
5. Arrange and pin to front of stocking.
6. Using the dots as a guide, punch holes with screw punch through both paper and felt.
7. Remove pinned paper from front of stocking.
White Inside and Back of Stocking How-To
8. Place template for inside of stocking on two pieces of white felt.
9. Trace template and mark where cuff ends and stocking begins.
10. Cut about 1 inch around line.
11. Lay the front of stocking on top of two pieces of white felt.
12. Line up the front with the inside of stocking.
13. Line up top of front of stocking with line marked for cuff; pin in place.
14. Sew a seam with a 1/8-inch seam allowance around the entire stocking, including cuff, leaving the top open.
15. Backstitch at both ends.
16. Cut excess white felt from stocking.
17. Trim excess seam allowance from cuff. Fold cuff over.
18. Sew embellishments on.
Resources
The screw punch can be found at Martha Stewart Crafts. The felt used on today's show can be found at aetnafelt.com.
Felt Punched Stocking
The Martha Stewart Show, December 2007

sew, sew, sew... let's see if I get time to make some stockings and then you can see how lovely they look with sewn details instead of punched...
www.muzmuzcreations.blogspot.com
I had trouble with the letters. I used the big punch, but the letters holes were too close together.
You really have to push down hard on the tool and wiggle it in place to get through the paper and felt. I was having difficulty as well as it takes a lot more pressure than I anticipated. I am really happy with how it looks so don't give up. Good luck
and snowflake template). Any suggestions on what I can do?
and snowflake template). Any suggestions on what I can do?
I am trying to make these stockings and am having a lot of trouble with the screw punch! The screw punch doesn't seem to be working properly and isn't fully cutting through the felt. The felt ends up ripping which causes the space in between the holes to rip (alphabet
Can you please attach a picture of each stocking to this page.
re: felt punched stocking