- Primer and paint (optional)
- Paintbrushes (optional)
- Wooden plaque
- Metal label holders with screws
- Cup hooks
Prime and paint your plaque, if desired; let dry.
Using a ruler and pencil, make a mark on the front of the plaque 1 inch down and in from the top-left corner; repeat on top-right corner. Working your way down the plaque, make as many equally spaced marks as you'll need for your keys.
Place the left-side hole of a label holder over the top-left mark, and use an awl to burrow into the wood; repeat on top-right mark with the right-side hole of the label holder. Drive corresponding screws into the wood. Repeat step for remaining marks.
Center a cup hook underneath the top-left label holder, and screw it into the wood. Repeat step for each label holder.
Insert labels describing which key is which into holders, and hang the rack on a wall.