Animal Party Hats
Source: The Martha Stewart Show, Episode 5128
- Measuring tape
- Honeydew melon
- 100 percent wool felt in a variety of colors
- Shallow bowl
- Petroleum jelly
- White glue
- Bootlace or sturdy cord
- Owl or goose template
- Fabric glue
Animal Party Hats How-To
1. Measure the child's head, and choose a honeydew melon that has the same circumference. Place melon in a shallow bowl to keep it steady, and lightly coat with petroleum jelly.
2. Mix 8 cups of hot tap water with 1 cup of white glue. Cut a 12-inch diameter circle from wool felt, and soak in glue mixture until fully saturated. Wring out liquid and stretch felt over melon.
3. Tie a bootlace or cord into a slipknot and slide over felt, halfway down melon. Tighten cord around melon. Pull felt evenly below the cord until the felt above is smooth and ripple-free. Let dry overnight.
4. Mark the approximate center top of the dried felt with a piece of chalk. Draw a chalk line, 5 inches from the center point, all the way around the felt.
5. Mark a point on the line that you'd like to be the center-front of the brim on the hat. For the owl: Draw an inverted, convex "V," about 1 inch high and 3 inches wide, centered above this point. For the goose: Draw a low, long arch on either side of the center point, with each arch about 1 inch high and 4 inches wide.
6. Remove slipknot and loosen felt from melon. Cut felt along chalk lines.
7. Print owl or goose template and use as a guide to make eyes, beak, and other details out of different colored pieces of felt. Attach felt pieces to hat with fabric glue.
100 percent wool felt is available from Magic Cabin.