advertisement

advertisement

No Thanks
Let
Keep In Touch With MarthaStewart.com

Sign up and we'll send inspiration straight to you.

Martha Stewart takes your privacy seriously. To learn more, please read our Privacy Policy.

Project

Handmade Patchwork Quilt

Introduction

"This quilt top is very easy to make, even if you're new to quilt making," Joelle says. "The design is created simply by sewing strips around a center piece to form concentric rectangles." Below are Joelle's step-by-step instructions.

 

 

Materials

  • Combined total of approximately 7 to 8 yards of 45-inch-wide fabric in a pleasing color palette
  • Quilt Fabric
  • Binding fabric: 3/4 yards 45-inch-wide fabric for the binding
  • Backing fabric: 2 1/2 yards of 120-inch-wide quilter's muslin (or approximately 7 yards of 45-inch-wide cotton), for quilt back
  • Cotton thread in a color that blends with the fabrics you chose (she used a creamy white for hers)
  • Cotton batting, Queen Size
  • Rotary cutter
  • Straightedge ruler (6.5 inches by 24.5 inches)
  • 24-by-36-inch cutting mat

Steps

  1. Step 1

    Wash, dry, and iron all fabrics.

  2. Step 2

    Using a rotary cutter, cutting mat, and a straightedge ruler, cut each piece of fabric into 45-inch-long strips (from one finished edge of the fabric to the other) of the following widths: 1.5 inches 2.5 inches 3.5 inches 4.5 inches 6.5 inches Cut as many as you can from the fabric available, being sure to cut at least one of each width in each fabric.

  3. Step 3

    Trim the selvages (the finished edges) from each strip, and organize them in piles by width.

  4. Step 4

    Select one 6.5-inch-wide strip and cut it to create a rectangle for the center of your quilt. She cut hers into a 6.5-by-7.5 inch rectangle. Set the remainder aside for use in piecing the rest of the quilt.

  5. Step 5

    Select your second strip, place it on top of the center rectangle with one edge aligned, right sides together. Pin it in place, then sew the pieces together along that edge, leaving a 1/4-inch seam allowance. (You'll use 1/4-inch seams throughout.) Trim off the excess length of the strip.

  6. Step 6

    Unfold the sewn rectangles and press the seam to one side.

  7. Step 7

    Select your third strip and prepare to add it to the others. Each time you add a strip to the quilt, you will follow the same steps: Position the existing work right side up, with the most recently added piece on the left side. Place the new strip right side down along the top edge, pin it into place, and stitch it to the quilt. Trim off the newest strip's excess length, and press the seam to the side.

  8. Step 8

    Rotate the existing work so that the newest strip is on the left side, and continue adding pieces in this way until the quilt is approximately 40-by-40-inches wide.

  9. Step 9

    Once the quilt has reached this size, you'll need to piece some of your remaining strips together along their short sides before sewing them onto the quilt edges as described above. (As the quilt gets even larger, you may need to piece 3 strips together to measure the length of one side.)

  10. Step 10

    Continue adding strips until the quilt is large enough to cover your bed.

  11. Step 11

    Once you've finished piecing the top of the quilt, you will need to baste it, quilt it, and bind it. If you aren't equipped to do this at home (or just don't have the time), have a quilting service complete it for you. She hired Gina Halladay of the Threaded Pear Studio in Brea, California, to finish this quilt for he; call Gina at 714-342-6922 for an estimate on your project.

Source
Blueprint, May/June 2007

Reviews (9)

  • Tetamalu 6 Feb, 2009

    In addition to lack of detail--diagrams and photos, another segment on machine quilting at home is needed. Not all of us have access to quilting services, nor are clever enough to do it by hand!

  • jimsqueeniechef 20 Jun, 2008

    As a quilter and remember my goofs in the beginning as I had no one to turn to and didn't know what to buy, I definitely agree with every comment on this particular site. I have noticed the same problem with your other quilting ideas. Maybe you should have a "key" telling if the project is for a beginner, intermediate or advanced worker whichever the craft is. Thank you, Martha!!

  • JuneAB 13 Apr, 2008

    I agree about the lack of pictures. It is a large progect to take on without some better views. It does look pretty on the siide, but the colors are so light that it is hard to get a good enough idea of the pattern.

  • bevf 20 Mar, 2008

    I agree that a few line drawings would be very helpful, especially if you have not done much quilting. A full, overall picture would be great.

  • caroltheknitist 20 Feb, 2008

    I'm assuming it's a giant log cabin, but another picture or diagram would be nice.

  • FutureMrsBurnett 14 Feb, 2008

    The colors are lovely(or at least the little bit of color that is seen) but it could defiently use more angles and closeups so that you could see it in different lighting

  • shirl482 12 Feb, 2008

    oh martha!!! you can do better than that.....have more drawn pix or something so we can really go eyeball to eyeball with this quilt ........

  • usstinson 3 Feb, 2008

    i would love to see more pictures of the quilt.

  • clattanz 30 Jan, 2008

    The photo of the quilt isn't the best. You really can't make out the detail or the pattern.