Animal Silhouette Pillow

Make a decorative linen pillow adorned with charming felt animals -- perfect for any child's bedroom.

Animal Silhouette Pillow

Source: The Martha Stewart Show, March 2009


  • Laser printer

  • Scissors

  • Iron

  • 100 percent wool felt in a variety of colors

  • Sharp fabric scissors

  • 1 yard cotton canvas fabric

  • Fabri-Tac fabric glue

  • Pins

  • Sewing machine

  • Machine-sewing thread in same color as canvas

  • 18-by-18-inch pillow form


  1. Print farm animal templates 1, 2, and 3 or sea animal templates 1 and 2 on plain paper with a laser printer. Roughly cut the animal shapes from the paper.

  2. Place one animal shape face down on felt. With a hot, dry iron, press the back of the paper to transfer the shape to the felt. Press the iron down heavily and rub vigorously until the shape is transferred. Repeat with all the animal shapes on different colors of felt.

  3. Cut all animal shapes from the felt.

  4. Cut three pieces of cotton canvas: one 19-by-19-inch piece, one 14-by-19-inch piece, and one 13-by-19-inch piece. Set the two smaller pieces aside.

  5. Lay out the felt animals on the large square canvas piece as you would like them on the front of the pillow. Start with the large shapes and fill in gaps with the smaller ones. When you are happy with the design, tack the animals down with fabric glue.

  6. With thread that matches the canvas, machine-sew around the animals to secure them, about 1/8 inch within the edge of the felt. Sew slowly and with patience; when turning corners, bring the needle down and lift the presser foot to reposition the fabric.

  7. Create a half-inch hem on one of the long sides of both of the smaller canvas pieces. For the 14-by-19-inch piece, fold the hemmed side down another 2 1/2 inches, and press.

  8. Create the back of the pillow with a pocket opening. Lay the appliqued piece face up on a flat surface. Place the hemmed and folded piece on top of the appliqued piece, with the 2 1/2-inch folded edge facing up, and match the raw edges with the top of the appliqued piece. Place the other hemmed piece on top of both, right side facing down, and match the raw edges with the bottom of the appliqued piece. Pin all pieces in place.

  9. Sew around all four sides with a half-inch seam allowance. Clip the corners, being careful not to cut into the seam. Turn the pillow right-side out and turn the corners out to a point with a bone folder. Insert pillow form.


Be the first to comment!