Project

Dog-Appliqued Infant Bodysuit

Share some puppy love with the baby in your life with these appliqued one-piece baby rompers.

Dog-Appliqued Infant Bodysuit

Source: The Martha Stewart Show, February/March 2008

Introduction

Tip: This process is not restricted to baby rompers; you can use silhouettes to personalize a variety of clothing and household items.

Trans-Web fusible web on release paper can be found at reprodepot.com. The fabric used for the dachshund design is Kashmir by Amy Butler. The fabric used for the Frenchie pattern is Dandy Damask by Michael Miller.

materials

  • Iron

  • Sewing machine

  • Scissors

  • Damp, clean clot

  • Card stock

  • Patterned fabric

  • Trans-Web or other fusible webbing on release paper

  • Black marker

  • Solid-color one-piece baby romper

  • Machine-sewing thread in a coordinating color for decorative topstitch

  • Hand-sewing needle

  • Button in coordinating color (optional)

steps

  1. Download and print the French bulldog silhouette on card stock, or create a dog silhouette of your own by tracing a photograph. If you make the silhouette yourself, shrink or enlarge it to make sure that it is about 6 inches wide.

  2. Cut the dog silhouette from the card stock.

  3. Choose a fun, graphic, patterned fabric for the dog applique. Larger, busier patterns work best on simple silhouettes. More detailed dog silhouettes look better in smaller patterns, so the details of the dog's shape are not lost in the fabric.

  4. Cut a square or rectangular piece from the fabric approximately 7 inches square.

  5. Cut a piece of Trans-Web slightly smaller than your fabric square.

  6. Using an iron on the wool setting, iron the Trans-Web onto the back of the fabric; the rough side of the Trans-Web should be facing the wrong side of the fabric. Allow the paper-backed fabric to cool.

  7. Using a black marker, trace the dog silhouette onto the Trans-Web paper backing.

  8. Cut out the dog silhouette from the paper-backed fabric.

  9. Peel the paper backing from the applique to expose the iron-on webbing.

  10. Position the applique, fabric side up, onto the romper. Make sure the applique is positioned above the waistline, so the full silhouette will be visible if the baby is wearing pants.

  11. Lay a damp cloth over the applique and iron with steam for 10 seconds.

  12. Once the applique is fused to the garment, use coordinating thread and a simple zigzag stitch on your machine to sew around the edge of the applique.

  13. Once you've sewn around the entire silhouette, tuck the thread tail back under the stitches by hand with a needle to ensure threads are secure. Optional: Sew a button on the applique for the eye.

Reviews

Be the first to comment!

Related Topics