Close

Project

Animal Night-Light

This adorable animal night-light makes the perfect addition to any nursery.

Animal Night-Light

Source: The Martha Stewart Show, May 2007

Introduction

Resources: 8-inch round lampshade bottom, Wire #1402 from fogglighting.com, natural cheese cloth from Whole Foods, light bulb base from Sunrise Lighting (Phone: 212-268-8505). Visit Martha Stewart Crafts at Michaels craft stores or at www.marthastewartcrafts.com for the following: decoupage glue and sealer with brush applicator (4 ounces for $3.99), art and craft glue (4 ounces for $2.99), seam binding (12 inches for $2.99), card stock (12-foot-by12-inch, 24 pieces per pack for $10.99), and tissue paper (20-inch-by-30-inch, 6 pieces per pack for $2.99).

materials

  • Balloon

  • Medium bowl

  • Paper towel

  • Oil

  • Natural cheese cloth

  • Scissors

  • 8-inch-diameter round lampshade bottom wire

  • Fabric stiffener

  • Spray bottle

  • Decoupage gel

  • Colored tissue paper

  • Seam binding

  • Turtle template

  • Elephant template

  • Pin

  • Green card stock paper

  • Mat knife

  • Green tongue depressors

  • Black marker

  • Google eyes, optional

  • Bulb stand

  • 7.5 watt bulb

steps

  1. Rest an air-filled balloon in a medium bowl to hold in place.

  2. Using a paper towel, grease balloon surface with oil.

  3. Using natural cheese-cloth, trim ends to make a large circle. Mold onto top half of balloon. Smooth out surface, to prevent bumps.

  4. Place an 8-inch-diameter round bottom wire over balloon.

  5. Spray natural cheese-cloth with fabric stiffener made from 1 part water and 1 part fabric stiffener.

  6. Trim hanging excess cheese-cloth to even out length.

  7. Fold excess cheese-cloth up and over wire to enclose it, and create a finished rim. Let dry 1 1/2 to 2 hours.

  8. Using decoupage gel, coat cheese cloth.

  9. Cover dome with triangle-cut tissue paper (for base color). Once tissue paper is in place, seal with decoupage gel.

  10. Place precut segment on dome top. Use decoupage gel to adhere. Place second precut segment on top of first. Add more gel to seal segments in place. Repeat process for remaining segments.

  11. If necessary, apply another coat of decoupage gel and allow to dry 30 minutes.

  12. Poke hole in balloon to let it deflate slowly. Remove balloon.

  13. Glue on seam binding.

  14. Download and print turtle template; cut out shapes. Using green card stock paper, cut out shapes for head, feet, and tail.

  15. Using a mat knife, cut green tongue depressors to 1 inch in length. Attach to paper using glue. Attach remaining foot to shade.

  16. While flat, draw eyes using black marker or attach google eyes. Fold head to slight cone shape to add dimension. Attach to shade with glue.

  17. Place shade over bulb stand with 7.5 watt bulb.

Reviews

Be the first to comment!