Twig Peg Rack with Conan
Create a rustic peg rack out of a white birch branch. You need only a few tools and someone to assist you. And remember, when selecting a branch, look for one that has already fallen off the tree.
- 2-inch-diameter birch branch or other suitable branch
- Small pruning shears
- Small saw
- #6 countersink bit
- Two 2 1/2-inch #6 wood screws
- Two 3/8-inch wood plugs
- Rubber mallet
Select branch, making sure the main branch has several smaller twigs, which will serve as the "peg hooks."
Using pruning shears, trim the smaller twigs to 2 to 3 inches. Using a small saw, cut the branch to desired length, and remove any branches on one side (you'll need a flat side to hang the rack).
To mount the peg rack vertically, use a countersink bit, and drill one hole near the top of the branch and one near the bottom. Use 2 1/2-inch screws to attach the peg rack to the wall. Using a rubber mallet and wood plugs, cover the screw holes.