Project

Jack-Chain Necklace

A trip to the hardware store uncovers an unexpected trove of jewelry-making supplies -- one find, lightweight jack chain, can be used to fashion a chain necklace like no other.

Jack-Chain Necklace

Photography: Bryan Gardner

Source: Martha Stewart

Introduction

Your local hardware store should be able to cut a piece of jack chain to size for you; if you have to measure it out yourself from a larger piece, use standard household pliers to bend apart the links to separate the length you need.

materials

  • 28-inch piece of 1/16-inch cotton cable cord

  • 12-inch piece of #16 size brass jack chain

  • Two 1/16-inch aluminum sleeves

  • All-purpose clear drying white glue

  • Scissors

steps

  1. Thread cord halfway through the last link of one end of the jack chain. Bend the cord in half so both ends meet.

    chain-necklace-ht-hardware-jewelry-047-ld110089.jpg
  2. Thread both cord ends together through one aluminum sleeve, then slide the sleeve all the way down the cords to create a 1/4-inch loop around the link of jack chain. Glue around sleeve edges to secure and allow to dry.

  3. Thread both cord ends together through the second aluminum sleeve until 1/2 inch of the cords appear through the other side.

  4. Trim one of the cords, and pull the sleeve back over it slightly until the cut end is hidden halfway down inside the sleeve; add glue inside the sleeve to secure the cord. Allow to dry.

  5. Add more glue inside the aluminum sleeve where the cord end is hidden, then thread the remaining cord end through the last link of the other end of the jack chain and insert it into the sleeve to create a second loop to close the necklace. Allow to dry.

Reviews

Be the first to comment!